Home > Downloads > ASE2000 Downloads

ASE2000 downloads

The following list contains links to downloads for various ASE2000 Communication Test Set files. Select the item to be downloaded from the list.

ASE2000 Communication Test Set Software - Standard Version

Posted 6-Jul-2010

Download the latest release of the Standard Version of the ASE2000 Communication Test Set. This service is available currently licensed users of the ASE2000, or to those who need to view a capture file. The software requires the ASE2000 hardware and licence key to operate.

To View capture files, no hardware is required, however you will have to contact ASE for a licence key to view the captured data in the correct protocol format.

Current Standard Version of the ASE2000 Communication Test Set software is Version 1.52, File size approximately 45 MB. Please note: Version 1.52 requires the latest Microsoft System Installer (MSI v 3.1). Please click here to install MSI software.

ASE2000 Standard Version Download - ASE2000 Communication Test Set software

ASE2000 Communication Test Set Software - Trial Version

Posted 13-Dec-2005

Trial Version Introduction - Describes procedure for downloading, installing, and running the ASE Trial Version.

NOTE!!! "Trial Version Introduction" document contains the Protocol License and Password information that will be required to run the Trial Version of the ASE2000.

	Trial Version Introduction- DOWNLOAD AND READ ME FIRST! (This will open a PDF viewer - You can save or print the file from there)
	ASE2000 Communication Test Set software, Version 1.43T (Trial Version). ASE2000 Communication Test Set software, Version 1.43 (Trial Version). File size approximately 5.45 MB

ASE2000 Test Set Documentation

Posted 12-Jun-2007

http://www.ase-systems.com/downloads/ase2000_doc.zip - ASE2000 Communication Test Set documentation, ZIP file format. All documentation files are Word 97 format. This download includes the following documents:

• Important Notice

• ASE2000 Getting Started Guide, Version 1.9

• ASE2000 User Guide, Version 2.2

• WEB Site Download Distribution

• Trial Version Introduction

This documentation is used with both the Standard Version and the Trial Version of the ASE2000 software. Trial Version users should be sure to read the Trial Version Introduction before attempting to load and use the Trail Version software. File size approximately 7.5 MB.

ASE2000 Test Set I/O Drivers (Windows 95 / 98 / ME / NT 4.0)

Laptop BCOM PCMCIA I/O Card Posted 22-May-2000
pcmciadrv.zip - Windows NT 4.0, Windows 95, Windows 98, and Windows ME I/O drivers for the ASE PCMCIA I/O card. This driver is used in conjunction with ASE2000-PCM-M and ASE2000-PCM-RS model test sets. File size approximately 130 KB.

Desktop BCOM2 I/O Card PC Board Posted 22-May-2000
bcom28drv.zip - Windows NT 4.0, Windows 95, Windows 98, and Windows ME I/O drivers for the ASE BCOM2 I/O card. This driver is used in conjunction with ASE2000-BCOM-M and ASE2000-BCOM-RS model test sets. File size approximately 130KB.

SafeNet Sentinel Security Plug (Dongle) Posted 09-Dec-2009
SentinelProtectionInstaller7.6.1.zip - Windows NT 4.0, Windows 95, Windows 98, Windows ME, Windows 2000, Windows XP, I/O driver for the SafeNet Sentinel Security Plug. This driver is used in conjunction with ASE2000-COM model test sets to enable the ASE2000 software and supports both the parallel port and USB security plug (dongle). File size approximately 6.2MB

ASE2000 Test Set I/O Drivers (Windows 2000 / XP / Vista)

ASE BCOM-USB Device Driver Posted 11-Jun-2009
bcom-usb-drivers.zip - Windows XP, and Windows Vista I/O driver for the ASE BCOM-USB device for use with the ASE2000-USB-M and ASE2000-USB-RS models of the ASE2000 test set. If using Windows 7 please go to Windows 7 section below for appropriate driver.

Laptop BCOM PCMCIA I/O Card Posted 15-Aug-2001
win2kpcmciadrv.zip - Windows 2000 , Windows XP and Windows Vista I/O driver for the ASE PCMCIA I/O card. This driver is used in conjunction with ASE2000-PCM-M and ASE2000-PCM-RS model test sets. File size approximately 65 KB.

Desktop BCOM2 I/O Card PC Board Posted 15-Aug-2001
win2kbcom2drv.zip - Windows 2000 and Windows XP I/O driver for the ASE BCOM2 I/O card. This driver is used in conjunction with ASE2000-BCOM-M and ASE2000-BCOM-RS model test sets. File size approximately 65 KB.

SafeNet Sentinel Security Plug (Dongle) Posted 09-Dec-2009
SentinelProtectionInstaller7.6.1.zip - Windows 2000, Windows XP, Windows Vista I/O driver for the SafeNet Sentinel Security Plug. This driver is used in conjunction with ASE2000-COM model test sets to enable the ASE2000 software and supports both the parallel port and USB security plug . File size approximately 6.2MB.

UnZIP the downloaded file onto a flash drive or into a temp directory on your C drive to create a Driver Installation folder and specify the location of the drive and folder when prompted by Windows for the location of the I/O driver.

!!! Windows 2000 / XP / Vista - PLEASE NOTE !!!

The drivers are not "signed" by Microsoft and, depending on the security settings of your system, this could prevent installation, generate a warning, or allow installation. The default is to generate a warning. Please do not abort the installation

ASE2000 Test Set I/O Drivers (Windows 7)

New! ASE BCOM-USB Device Driver Posted 06-Jul-2010
Win7-bcom-usb-drivers.zip - Windows 7 (32 and 64 bit drivers and installation guide) for the ASE BCOM-USB device for use with the ASE2000-USB-M and ASE2000-USB-RS models of the ASE2000 test set. Note: These drivers are Digitally Signed by Applied Systems Engineering. UnZIP the downloaded files onto a flash drive or into a temp directory. Please be sure to follow the Windows 7 I/O Driver installation procedures as documented in the BCOM-USB Device User Guide (Version 1.3 or greater) for correct Windows 7 installation.

SafeNet Sentinel Security Plug (Dongle) Posted 09-Dec-2009
SentinelProtectionInstaller7.6.1.zip - Windows 7 (32 and 64 bit versions) I/O driver for the SafeNet Sentinel Security Plug. This driver is used in conjunction with ASE2000-COM model test sets to enable the ASE2000 software and supports both the parallel port and USB security plug . File size approximately 6.2MB

BCOM-USB Device User Guide

Documentation for installing USB drivers, updating the lisence file, and how to upgrade the firware within the BCOM-USB device.

BCOM-USB Device User Guide v1.3

For more information about the products and services Applied Systems Engineering provides, select from the main menu on the top or please feel free to contact us directly if you have any questions or would like to discuss your requirements with an application engineer.

You may contact us in Campbell, CA by phone at 408-364-0500, fax to 408-364-0550, or via email at products@ase-systems.com.

Normal business hours are 9:00AM to 6:00PM Pacific Time, M - F.

Products | Support | Downloads | Training | FAQs | About Us
Links | Site Map | Search | Contact Us | Back to Home

Applied Systems Engineering, Inc.
1671 Dell Avenue, Suite 200
Campbell, California 95008
Phone: (408) 364-0500 • Fax: (408) 364-0550
Email: products@ase-systems.com

Copyright ©2003-2009 Applied Systems Engineering, Inc.
All rights reserved.