SYNC 4000 – Control Center Front End

40001 SYNC 4000 is a high performance SCADA/DMS and control center front end processor / head end system for advanced distribution automation, substation automation, wide area monitoring and inter-control center communication applications. With support for a large library of utility protocols including ICCP, DNP3 and IEC 101/104 and a scalable architecture that enable private cloud deployments and redundant and virtual instances, SYNC 4000 meets the requirement of connecting thousands of field devices to the control center to new and current SCADA/DMS systems and other enterprise software systems.

SYNC 4000 together with SPT-ARM and SYNC 2000 field gateways supports data collection from legacy devices as well as current ones. With support for IEC 61131 logic engine and advanced diagnostics and device management features and together with SYNC 2101 and SYNC 3000 field controllers, SYNC 4000 enables building advanced distribution applications for your grid. SYNC 4000 with IEEE C37.118 support is a high performance Control Center Phasor Data Concentrator (PDC). Integrated with SYNC 3000 Substation PDC they provide a complete solution for WAMS data acquisition.

General

  • High performance with minimum data loss and latency
  • Vast protocol conversion capability– ICCP, Modbus, IEC 61850, DNP3.0 etc
  • Legacy protocol support with support of SPT/4/SYNC2000/3000 devices
  • Multi master/SCADA communication capability
  • Disturbance and fault record collection and management
  • IEC61131 based programming engine on request
  • Time synchronization using IEC60870/ DNP3/ SNTP/ NTP/ IEEE 1588 (on request)
  • Device management using SNMP/Webserver
  • User friendly desktop based configuration and diagnostics utility
  • Communication Redundancy and hot standby device redundancy supported
  • Assigns static IP address to the field devices there by eliminating the requirement of fixed IP at remote
    location
  • IEEE C37.118 data processing, time alignment and aggregation
  • TCP, UCP and hybrid communication profiles for PMU data

Security

  • Supports communication security on both upstream and downstream
  • Protects the system against possible intrusions with built in firewall
  • Support for compliance with NERC-CIP requirements
  • Supports IEC 62351 based transport layer security
  • Provides SSL VPN with AES, DES or 3DES encryption
  • Follows IEC62351-5/DNP3 secure authentication process

Scalability & Upgradability

  • Virtual instance support
  • Server redundancy and Virtual Instance redundancy
  • Private Cloud support
  • Dynamic deployment of multiple instances depending on load
  • Server grade hardware
  • Seamless integration with field devices

Model Description
SYNC 4000-M1Server machine hardware with 2.4GHz 6 core , one serial port, four Gbs Ethernet port

Application Description
APP –CCGControl center Gateway with support for DNP3.0, IEC60870-5-101 / 104, ICCP/TASE.2 with field devices and SCADA/DMS/EMS systems. Support for web-services integration with enterprise applications.
APP- PDCPhasor data concentration application with IEEEC37.118 streaming