SAM/SAM-Edit Release Notes

The SAM support Pages has added a specific section for Release notes. This list describes what has changed from one version to the next

Date

Release

Description

Sam

Edit

8-Aug-07

1.0.0.0

Initial release
12-Sep-07

1.0.0.1

Added option to sound audible on either alarm set only, or on both set and reset
No longer display device name
13-Sep-07

1.0.0.2

Added option whether or not to process alarms (audible and blink) on abnormal reset
Added option to AckAll button to operate on all system alarm or only those on current display
28-Sep-07

1.0.0.3

1.0.0.2

Correct audible alarm timeout processing
Correct display color for points in alarm, after communication failure recovery
2-Oct-07

1.0.0.4

Correct display of acknowledged alarms that arrived with a device time stamp
28-Mar-08

1.0.0.5

Do not sound audible on return-to-normal if such alarms are disabled, even if prior alarm-set condition is unacknowledged
12-Dec-08

1.0.0.8

Added floating point formatting option. E.G., format f2 displays floating point values with 2 decimal points
4-Mar-09

1.0.0.9

Added vertical tree-structure option for alarm page access
13-Apr-09

1.0.0.12

Corrected code the could limit to 1,000 points
4-Jun-09

1.0.0.13

1.0.0.12

Added Ctrl-F11 to toggle Task Bar
1-Mar-10

1.0.0.14

Corrected updates from periodic integrity scans (non-events)
30-Mar-10

1.0.0.15

Correct disk flush issue on installing new configurations. A new file could have been lost if the system were powered off, instead of proceeding with a normal program close
21-May-10

1.0.0.16

1.0.0.15

Deleted older alarms for the same point from the Alarm Summary
28-Jul-10

1.0.0.17

Retained event log over restarts
4-Aug-10

1.0.0.19

Allowed enter of blank field in grid entry
28-Jul-11

1.0.0.27

Added support for DNP3 Floating Point analogs
4-Aug-11

1.0.0.28

Added ability to remove Equipment and RTU names from tabulars
25-Aug-11

1.0.0.30

Increased efficiency generating Event Log by not displaying unacknowledged (blinking) status
Add AcknowledgeAllStates option to force two acknowledgements when alarm is set and reset before being acknowledged the first time
26-Aug-11

1.0.0.31

1.0.0.30

Fixed crash on event declared when controlling output points. Error introduced in 1.0.0.30
2-Apr-12

1.1.0.0

New screen layout flexibility
16-Apr-12

1.1.1.0

Allowed more that one alarm page display row/column
14-Sep-12

1.1.1.2

1.1.1.0

Look for license information under Local Machine
05-Feb-13

1.1.1.3

Added option to remove selective points from tabular
12-Jul-13

1.1.1.4

1.1.1.3

Stopped lockup on tabular displays when focus remained active on one line
14-Feb-14

1.1.1.4

1.1.1.5

Disallowed sorting on tabular displays
13-May-14

1.1.1.7

1.1.1.5

Corrects timing problem where background integrity polling could be permanently blocked
14-May-14

1.1.1.8

Added ability to link digital output and digital input to same button. The button provides the ability to issue a control and displays the status of the input point
01-Aug-14

1.1.1.8

1.1.1.9

Allow deletion of index page
12-Sep-14

1.1.1.10

Corrected file open problem on some systems. Needed a Microsoft workaround
15-Sep-14

1.1.1.11

Allowed ‘.’ In point names

1.1.1.12

Internal, never released
23-Sep-2014

1.1.1.13

  • SamEdit displays SamEdit version and information about last time SAM config file was saved
  • SAM displays SPT version
4-Dec-2014

1.1.1.14

Fixed an issue with SAM reading security dongleon certain ssytems.
6-Mar-2015

1.1.1.15

Corrected loop initialization issue if twopages each had button links pointing to the other.